SKP1000 Firmware Update Procedure

This is tell you how to update SKP1000 Firmware.

Before update firmware, please take out the TF card and insert it into the card reader, then plug into the computer USB port. Double click "My Computer", find out " local Disk (H:), right click to choose "Format".

Tip: Tick on the "Quick format" and click "Start.
After complete format, go to the official site to download the update file, then copy and paste the file into the TF card, after finish, plug the TF card into the machine, power on the machine to the main interface.
Click on "Firmware update" to update the system or the Adaptor.

Firstly choose "System firmware", press [Yes], the procedure shown as below:

Update Firmware succeed shown as below, Press [NO] to back.

Choose " Adapter update", after finish, reboot the machine to go on use SKP1000.

Done.

If you want to know How to use SKP1000 to program key, you can visit here: https://obd22017.wordpress.com/2017/09/01/how-to-use-skp1000-to-program-key/

How to setup Elsawin 5.2 on Windows 10 64bit

This is how to setup Elsawin 5.2 on windows 10 64bit, esp for those with an error “unlicensed version”.

Background info:
Had windows 7 running - Elsa working fine, then updated to windows 10 and it stopped with the error this is unlicensed version, then during windows 10 update, it seemed to fix it self.

Then,it happened again, this time I used the keygen to register it and it worked!

Now, its done it again and still says this error even after using keygen again and can't get past this issue.

Here's the solution:
First:
start ElsaWin administration
login:admin/admin
Click to File on the left in the first line then code then code query or somthing like that. (I'm using the hungarian vers.)

On the pop-up window will be a provisional code. The final code block is empty!

Use the keygen how when you installed the program at first time.
The new final code paste to the empty block.

Don't close the administration panel!
Start ElsaWin main program and will work.

Not fixed the problem but Elsa will work for .....


NOTICE: RUN AS ADMINISTRATOR when open elsa win administration

For those running Windows 10 (32bit) and Elsawin 5.20, have a try with the solution if possible. Maybe it works also. Good luck!!!


How to setup Elsawin software on Windows 10?
ElsaWin 4.0 and 4.1 update should not have any problems installing first regardless, but most of the problems exist in the Elsawin 5.0 update when the SQL 2008 is installed. Windows 10 will give warning that the SQL 2008 may not be compatible, but it won’t stop the installation if everything is update correctly.
*** Make sure to run the setup.exe with Administrator permission ***

After every version installation finished, we should check to make sure the software is working. We should create a user for English as Administrator beside admin (password is admin) as default.

ElsaWin 5.0 update after 4.1 is done.

When the 5.0 update is done with the SQL server installation, the 5.1 and 5.2 update should be a breeze.

When every update is done, we need to install Acrobat 5.0.5 reader and SVG Viewer.

Now, we can install the Audi or VW data for ElsaWin 5.1 or 5.2 whichever the case may be. This process will take a long time since Audi data ~ 26 GB and VW ~ 36 GB

When everything is done, login as user, we should see the guide for accessing ElsaWin Repair Manual.


(Elsawin Windows 8: same as Elsawin Windows 10)

Special thanks to http://www.dognmonkey.com/audi/

Introductions of Cummins INLINE 6 Diagnostic Tool

Are you tired of trying to get a handle on all the vehicle data link adapter options available that are costly, unreliable, and serve only particular engine makes and service tool software applications? Cummins INLINE 6 Data Link Adapter. is fully compliant with TMC's RP1210 standard, and has been designed and environmentally tested to Cummins standards to be rugged and reliable. This blog will show more details about Cummins INLINE 6.

Image from Customer:

INLINE 6 Data Link Adapter for Cummins

1. Latest Version: V7.62
2. Supported Languages: English(united states)/Chinese(simplified)/Danish/Dutch/Finnish/French/German/Italian/Japanese/Korean/Norwegian/Portuguese/Russian/Spanish/Swedish/Turkish
3. Update by CD

INLINE 6 Features:

1. Supports SAE J1708/J1587 and J1939/CAN data links
2. Both CAN ports auto detect between 250 & 500 kbps
3. Supports USB full speed port at up to 2M baud rate
4. Custom USB cable includes thumbscrews for secure mounting to INLINE 6
5. Supports RS-232 PC serial port at up to 115.2k baud rate
6. Is fully compliant with TMC's RP1210 standard
7. Small enough to fit in pocket
8. Attractive black powder coated aluminum housing provides ruggedness
9. Derives 8 V to 50 V DC power from vehicle
10. Controlled by advanced 140 MHz 32-bit Freescale processor for maximum speed and performance
11. Includes 6 LEDs to indicate status of power, USB, RS-232, J1708/J1587, and two CAN communication ports
12. Both CAN ports support SAE J1939, SAE J2534, and ISO 15765 protocols
13. INLINE 6 is certified to meet European CE requirements
14. Rated for -40° to +85° C operating temperature
15. INLINE 6 meets rigorous Cummins in-cab environmental test requirements

Note:
1.The 7.62 Software only can fit Win 7 Operating System, can not fit Win XP!!!
2. Please don't change the time of your laptop easily.
3. INLINE 6 software : 159 USD only

If you want to know more details, please visit this site: https://obd22017.wordpress.com/2017/08/25/comparisons-of-cummins-inline-6-and-cummins-inline/

Update!!! BMW Dr.gini B020 Engineering Software

Dr.gini B020 BMW diagnostic software is a new program released as BMW ICOM software and tested OK to work perfect with a communication interface (BMW ICOM, BMW ICOM Next, BMW ENET cable, PASSTHRU or INPA K+DCAN cable).

Dr gini BMW download FREE: Unknown security
https://mega.co.nz/#F!VwJzgByC!K0krmp2Rfy86NetmhCIx6A
or
https://mega.co.nz/#F!Fl5WBR5D!Svh3FVE4A3FQboexaVPtFA

Dr gini BMW download: Tested OK
http://www.obd2eshop.com/wholesale/version-2017-7-bmw-icom-software.html


How to install Dr.gini – b020:

Step 1: install EDIABAS.
Run the EDIABAS _7.3.0.msi in the EDIABAS folder to install the EDIABAS
Do not change any setting during installation.

Step 2: install Dr.Gini
Unpack the “Setup Dr.Gini B014 EN.zip” to run and install
Note: the setup is not completed

Step 3: files replacements in EDIABAS
Copy extracted files in the ECU folder to the ECU folder where EDIABAS program is installed

Step 4: Copy the EDIABAS.INI in”INTERFACES/ENET Ediabas.INI and overwrite the C:/EDIABAS/BIN folder, as Dr.Gini will be connected by the ENET cable.
Copy the api32.dll file in the “API32.DLL” folder to:
For Windows 7/8/8.1 / 10 64-bit:
C:/Windows/SysWOW64
For Windows 7/8/8.1 / 10 32-bit :
C:/Windows/System32

Step 5: Copy the Gini_B020.exe file to C:/EDIABAS/BIN.
Sometimes, Gini_B020.exe is recognized as a malicious program and may be removed from an anti-virus program. If you feel that this process is unstable, you can just delete this file.

Dr.gini – b020 installation completes.!


How to use Dr gini BMW:


Dr.Gini – Interface Configurator (ICOM, ENET, K+DCAN, PASSTHRU)
Discover & manage up to 3x ICOM interfaces






Dr.Gini – Register a Battery (E series) – Expert




Dr.Gini – How fast you can read and display the engine analog values:
Petrol Engine: 21 gauges updated each 9ms approx.



Diesel Engine: 22 gauges updated each 8ms approx.



If your gauges are slow, it’s probably because of your communication interface

Dr.Gini – Reset Driver Side Window – Expert
Ecu: D_KBM
Job: STEUERN_FENSTERHEBER_DENORMIEREN
Argument: 11
–> Run Job



Attention:
the driver’s window will open and close itself !
Ecu: D_KBM
Job: STEUERN_FENSTERHEBER_EINLERNEN
Argument: 11
–> Run Job



25th December 2016… Save the date…






Dr.Gini B021 – What’s new in Basic version?

1. FSC read and write for E series
   –> enter Ecu Address, then press Status to get started
2. Maps Code generator
   –> drag and drop FSC in the Textbox to get started
3.  Dashboard controls
4.  Footwell Module Reset counter

Introduce the Vpecker E4 Diagnostic tool

Vpecker E4, is 2017 released new universal android based multifunctional diagnostic tool, which can support more than 78 cars of US domestic brands, European, Asian, Australian and Chinese vehicles.

Vpecker E 4 programer featrues:

1. 8 inch multi-touch screen.
2. Support multiple 23 languages.
3. One key update/logging/test report/feedback/function list via WIFI
4. Extensive vehicle coverage for most US, Asian ,European and Australian vehicle makes.
5. Automatically Wi-Fi update.
6. Powerful diagnostic functions and coding/restting/programming.
7. Work stably and smoothly in high and low temperature environment.
8. Unparalleled OBDII functionalities-support ALL 5 OBDII protocols and ALL10 test modes.
9. Complete function including live data, ECU programming and so many others.

Vpecker E4 Tablet Specification:

Vpecker E4 Scanner Operating System:

Vpecker E4 Diagnostic Tool Function Coverage:

 

 

 

 

 

 

If you want to know more details, please visit this site：http://www.obd2eshop.com/wholesale/vpecker-e4-8inch-pad-obdii-scanner.html